Special Brackets for Awning Fitting
We have a range of custom mounting brackets that are sometimes required to fit awnings in positions with obstructions such as drain pipes etc
The following examples are some of the more common types.
Custom brackets for mounting awnings
Gutter brackets
Overcome obstructions such as bungalow soffits
The Gutter Bracket is designed to be the perfect solution for low installation heights and to overcome obstructions which can arise from such installation as found when fitting awnings to bungalow roof lines or outward opening doors where additional height is required.
- Our standard range of gutter brackets are manufactured from 60x40 hollow box section in mild steel
- Can be made in stainless steel upon request
- Each bracket is subject to the full weather protection plan
- RAL colour of your choice.
Gutter sign brackets
Flexible fixing position while overcoming obstructions
The Gutter Sign allows a flexible fixing position away from your installation point. It allows the flexibility of installation in reveals and over patio windows. It is supplied with a moveable clamp which you can lock into position so obtaining the correct fixing position as preferred by manufacturers.
- Our standard range of gutter brackets are manufactured from 60x40 hollow box section in mild steel
- Can be made in stainless steel upon request
- Each bracket is subject to the full weather protection plan
- RAL colour of your choice.
Spreader Plate
Standard fixing for single storey extensions and load-bearing applications.
Designed to spread the load away from the top of the wall on a single storey extension.
- As pictured all standard dimensions are 930 mm leg with 5 fixing points
- Available in either mild steel or stainless steel
- the bracket is subject to the full weather protection plan
- Available in all RAL colours
Spreader Signpost Brackets
Overcome obstructions such as bungalow soffits
The Gutter Bracket is designed to be the perfect solution for low installation heights and to overcome obstructions which can arise from such installation as found when fitting awnings to bungalow roof lines or outward opening doors where additional height is required.
- Our standard range of gutter brackets are manufactured from 60x40 hollow box section in mild steel
- Can be made in stainless steel upon request
- Each bracket is subject to the full weather protection plan
- RAL colour of your choice.
Pipe brackets
Safe and compact Brackets for installing around wastewater pipes.
The Waste Pipe Bracket was designed and tested to overcome the installation of awnings in front of downpipes or uneven walls. Also used where there are limited fixing points below the awning mounting point, i.e. window/door revel.
Key Benefits:
- The standard backplate size is 250mm x 250mm which has 4 fixing points.
- Available in any RAL colour
Custom Brackets
Custom brackets can usually be made to fit the fitting requirements of your situation.
- full frame systems
- side fixtures for recess fixtures
- Available in either mild steel or stainless steel
- the bracket is subject to the full weather protection plan
- Available in all RAL colours